Skip to content

Gas Safe Registered No. 914673

CTL Plumbing & Heating logo

Herne Bay

Boiler installation in Herne Bay

A new boiler in Herne Bay starts from £1,850, and the survey and quote are free. We fit gas boilers in the town, LPG boilers on the park home sites east of it and oil boilers out towards Reculver, because we are Gas Safe registered with LPG on our registration and OFTEC certified for oil.

from£1,850free survey and written quote
Gas Safe Registered No. 914673OFTEC certifiedFree home visits across KentCall or text 07710 544484

In the town itself, from the seafront out to Beltinge and Greenhill, a new boiler is almost always one gas boiler replacing another. Across the Canterbury district, which takes in Herne Bay, 20% of homes have been built since 2000, going by the Valuation Office Agency, and the rest is a long run of older seaside housing. Where the new boiler goes where the old one was, it is usually a one day job. What moves the price is the house: the flue route, whether the boiler is moving, the state of the system, and whether the type of boiler is changing.

Replacing a boiler on a park home

Along Reculver Road and Reculver Lane there are residential park homes and holiday statics, and most run on LPG from bottles or a bulk tank. Replacing a boiler there is Gas Safe work under the LPG categories, and the boiler has to be one the manufacturer allows for LPG and for the space it is going into, which in a park home is usually tight. The flue, the condensate route and access for servicing all need planning before the old one comes out. Touring caravans and motorhomes are not work we take on. More on LPG, oil and park home boilers.

Oil boilers away from the gas main

13% of homes across the district are off the gas grid, according to the government's figures, and out at Reculver some homes run on oil. Fitting an oil boiler is OFTEC work, and the tank is part of the job: its condition, its position and its distance from the house and boundaries all come into the survey, because a new boiler on a failing tank is money spent in the wrong order.

What a new boiler has to meet

Fitting a new gas boiler is building work, and Approved Document L sets the floor: at least 92% ErP efficiency, time and temperature controls, and one extra energy saving measure on a combi going into an existing home. The boiler is sized from the home's heat loss rather than copied from the old one. Because we are Gas Safe registered we notify the work ourselves, and the Building Regulations compliance certificate follows to you.

What a replacement gas boiler has to meet APPROVED DOCUMENT L What a new boiler must meet Every gas boiler REPLACEMENTS INCLUDED At least 92% efficient Time and temperature control Sized from the heat loss Not oversized for the house A combi also needs AT LEAST ONE OF THESE Flue gas heat recovery Weather compensation Load compensation An optimising smart thermostat These 2021 rules apply until the new edition starts on 24 March 2027

On an exposed coast, plan the condensate and flue

A new boiler is the cheapest moment to get the condensate pipe right, because everything is being repiped anyway. The heating industry's guidance is that it should drain internally wherever possible, and that a pipe which has to run outside should be at least 30mm and insulated, with the risk of freezing greatest in a high wind chill. On a north-facing coast that is worth taking seriously. The flue terminal position follows the manufacturer's clearances from windows, doors and boundaries, and where the old position does not meet the new boiler's rules, that is found at the survey.

Clean the system before the new boiler goes on

Fitting a new boiler to a dirty system is the most common reason a good installation underperforms. Sludge from old radiators is drawn straight into the new heat exchanger, so the system is cleaned first, with a power flush where it is badly silted, a magnetic filter is fitted, and inhibitor goes in. If you are not sure the old boiler needs replacing at all, our guide to repairing or replacing a boiler goes through how the decision should be made, and the combi against system comparison covers which type suits which house.

What happens on the day

A like-for-like swap in the town is usually one day, with the heating and hot water off while the old boiler comes out and the system is cleaned. A move to a new position, a back boiler coming out or a change from a regular system to a combi adds a day or more, and the quote says which. On a park home the job is planned around the pitch, the gas supply is isolated at the tank or bottles, and the new boiler is commissioned on LPG before we leave. At handover you are shown the controls, the pressure gauge and how to reset the boiler, and the paperwork is explained rather than left on the side.

What you are left with

Our own work carries a 12-month workmanship guarantee. This is on top of your legal rights, which it does not affect. The boiler is covered by its manufacturer's warranty, whose terms depend on the make and usually on registering it and servicing it every year. You get the commissioning record filled in at handover, and the certificate follows once the work has been notified.

A recent customer wrote in a Google review, “Very happy with the boiler installation. Calum was professional and completed the job efficiently. Everything was left clean and tidy.”

CTL Plumbing & Heating fits new boilers across Herne Bay, Beltinge, Greenhill, Herne and Reculver, with free home visits and free quotes across Kent. For a quote on your home, get in touch.

Book a visit in Herne Bay

Calum Long is a Gas Safe registered, OFTEC certified engineer based in Bearsted, with free home visits and free quotes across Kent.

No heat? Burst pipe? Smell gas?

07710 544484

Call or text, 24/7: day or night, right across Kent.

Water leak or gas leak? What to do right now →

Free estimates

Get your free estimate

Call, text or email: free home visits and free quotes across Kent.

CallGet a free estimate